日本SMC帶逆流功能的減壓閥資料
出口要壓力不要超過進口壓力的90%。輸出壓力不得超過設定壓力的zui大值。
連接配管要充分吹洗。
Test method and conditions
The liquid contact portions were filled with sulphuric acid and left untouched
for half an hour. After the sulphuric acid was drained, the wetted parts are
filled with DI water. The specific resistance of the liquid discharged from the
outlet side of the sample was measured and recorded.
Model: SRF30

日本SMC帶逆流功能的減壓閥資料
∗Data provided in this section is just one example of the actually measured
values. Application examples illustrated in this flyer do not guarantee the
result of applicable use of this product
空氣的流動方向按箭頭方向安裝，不得裝反。
使用塑料材質的減壓閥，應避免陽光直射.
Test method and conditions
Particle counters were installed before and after the test sample.
The amount of particle generated from the sample is determined by the
difference in output values from each counter.
Flow rate of supplied DI water: 100 ml/min
Model: SRF30
種類 係列 連接口徑 zui高進口壓力 zui低進口壓力 調壓範圍 環境和介質溫度
普通型 AR10 M5×0.8 1 設定壓力
精密型 ARP3000 Rc1/4 0.8 比出口壓力高10%以上 0.05~0.85